Product Features
·Powerful functions with a maximum response speed of 250μs
·Normally open and normally closed contacts are interchangeable, equipped with a delay function
·Supports NPN or PNP output types for easy operation
·The -C5 version is fitted with an M8 connector for connection
Product Parameters
model NPN HA-M101N HA-M101N-C5
PNP HA-M101P HA-M101P-C5
illuminant Red light-emitting diode
Detection Range Reflective type: 0–100 mm; Total internal reflection type: 0–1000 mm
reaction time 250μs
Delay Function Select the switch to apply a 40-second delay
pilot lamp When the target is within the stable detection area, the green indicator light turns on; otherwise, the red light turns on.
sensitivity adjustment Seven-ring knob for fine adjustment
supply voltage DC 10V~30V
Consumption Current Below 40 mA
Output Selection LIGHT ON/DARK ON (Switch Selection)
Control Output Load voltage: 30 V; Load current: up to 200 mA; Remaining voltage: up to 1 V
Electrical Connection cable Default specifications: Cable output
connector Suffix-C5 specification: M8 four-pin connector
environmental resistance levels of protection /
ambient temperature Temperatures range from-20°C to +55°C, with no freezing occurrence.
ambient humidity 35–85% RH, no condensation
Environmental absorbance Incandescent lamp: Maximum 20,000 lux; daylight: Maximum 30,000 lux
antiknock characteristics Acceleration: 500 m/s², applied five times in each direction (X, Y, Z).
vibration resistance 10–55 Hz, composite amplitude of 1.5 mm; measured over 2 hours along the X, Y, and Z axes respectively
Shell Material PC (polycarbonate)
outline dimension 30.3mm(H)*9.8mm(W)*71.8mm(D)
Product Weight 80g
accessories of a product To purchase a bracket or cable, select them separately
Note: *-C5 indicates an M8 4-pin connector with a 150 mm cable lead.
Product Dimensions
Product Dimensions
Input and output circuit diagram
Input and output circuit diagram