Product Features
·Supports detection with multiple resolutions for fingers, palms and arms
·Compact and elegant design suitable for narrow installation spaces
·Two synchronization modes available: line synchronization and optical synchronization, featuring strong anti-interference capability
·Capable of rapid customization to meet various non-standard requirements from customers
·Compact and elegant design suitable for narrow installation spaces
·Two synchronization modes available: line synchronization and optical synchronization, featuring strong anti-interference capability
·Capable of rapid customization to meet various non-standard requirements from customers
Product Parameters
| model | NPN | HCB10-XN(G) | HCB20-XN(G) | HCB30-XN(G) | HCB40-XN(G) |
| PNP | HCB10-XP(G) | HCB20-XP(G) | HCB30-XP(G) | HCB40-XP(G) | |
| Number of optical axes | 8–96 bundles | 4–48 bundles | 4–32 bundles | 4–24 bundles | |
| Optical Axis Pitch | 10mm | 20mm | 30mm | 40mm | |
| Detection Height | Optical axis spacing × (Number of optical axes-1) | ||||
| Detection Distance | 2m (customizable to 3m) | ||||
| Minimum detectable object | 13mm | 23mm | 33mm | 43mm | |
| response time | 1 ms to 50 ms (depending on the number of optical axes) | ||||
| Safety Level | Complies with IEC 61496-1/2 safety standards | ||||
| Indicator (emitter) | Red indicator on when power is applied | ||||
| Indicator (receiver) | Power indicator (red): on when powered; Output indicator (blue): on when output active | ||||
| Synchronization Method | Optical sync / line sync (model selectable) | ||||
| supply voltage | DC 12V~24V（±10%） | ||||
| maximum output current | 200mA | ||||
| output form | NPN N0/PNP N0 (output when blocked); customizable for normally closed output specifications | ||||
| Consumption Current | 125mA~350mA | ||||
| Protection Circuit | Reverse polarity, overcurrent, overvoltage protection | ||||
| Electrical Connection | cable | Default specifications: PVC cable, 2 m length, 3 strands of 0.25 mm² each | |||
| connector | M12 4-pin connector with 150 mm cable | ||||
| environmental resistance | levels of protection | IP67 | |||
| Ambient temperature / humidity | -25°C to +70°C, no freezing | ||||
| 35–85% RH, no condensation | |||||
| ambient humidity | Sunlight: 30,000 LX; incandescent: 3000 LX | ||||
| antiknock characteristics | Acceleration 500 m/s², 5 times in each direction X/Y/Z | ||||
| vibration resistance | 10–55 Hz, 1.5 mm amplitude, 2 h each along X/Y/Z | ||||
| Shell Material | Shell: Aluminum alloy; End cap: ABS; Support frame: Cold-rolled steel plate | ||||
| outline dimension | Length (H) × 28 mm (W) × 13 mm (D). Note: Length (H) ranges from 100 to 1000 mm (depending on the model). | ||||
| Product Weight | 300g | ||||
| accessories of a product | not have | ||||
Note: X indicates the number of optical axes, G indicates optical synchronization; the -3M suffix model has a detection distance of up to 3 m; the -NC suffix model is a normally-closed output type; for through-beam types, the E suffix indicates the emitter and the R suffix indicates the receiver.
Product Dimensions
Wiring Diagram of Optical Synchronization Model
