Product Features
· Built-in RGB three-color light source with color mode and color mark mode
· Adjustable detection hysteresis to eliminate the impact of jitter of measured objects
· Unique dual-mode design supports simultaneous color and light intensity detection; it avoids false outputs at critical edge positions with no background or target objects, delivering stable detection performance
· Two-point setting method
· Adjustable detection hysteresis to eliminate the impact of jitter of measured objects
· Unique dual-mode design supports simultaneous color and light intensity detection; it avoids false outputs at critical edge positions with no background or target objects, delivering stable detection performance
· Two-point setting method
Product Parameters
| type | Conductor Extension Type | ||
| type | NPN | HS-S21N | |
| PNP | HS-S21P | ||
| illuminant | RGB three-color design with a 4-element LED array | ||
| Detection Distance | 10mm±3mm | ||
| reaction time | C and CI patterns: 80 μs; the value below MARK is 35 μs. | ||
| Output Selection | LIGHT-ON/DARK-ON | ||
| display indicators | Operation indicator light: red LED with OLED display | ||
| detection mode | The C and CI modes, as well as the MARK mode | ||
| Delay Function | Disengage the delay timer / Engage the delay timer / Single-time timer / Engage the delayed single-time timer. The display duration can be selected from 1 ms to 9999 ms. | ||
| Power Consumption | Power consumption below 850 MW (at a supply voltage of 24 V and a current consumption of up to 35 mA) | ||
| reaction time | Below 200 μs | ||
| Light projection element | Composite LED: Red/Green/Blue; Projected peak wavelengths: 640 nm/525 nm/470 nm | ||
| Mode Switch | Color Scale Mode | Color code detected: 0N | |
| Color Mode | ON when consistent | ||
| supply voltage | DC 12V~24V（±10%） | ||
| Output Maximum Current | 50mA | ||
| output form | NPN | NPN open-circuit collector transistor with a maximum drain current of 100 mA\nApply an additional voltage below 30 V DC (between the output and 0 V).\nResidual voltage below 1.5 V (at an input current of 50 mA) | |
| Max. sink current 100 mA; | Max. source current 100 mA; | ||
| Applied voltage ≤30 VDC (between output and 0 V) | Applied voltage ≤30 VDC (between output and +V) | ||
| Residual voltage ≤1.5 V (at 50 mA sink) | Residual voltage ≤1.5 V (at 50 mA source) | ||
| output function | Color Scale Mode | Color code detected: ON | |
| Color Mode | ON when consistent | ||
| short-circuit protection | equipped with (automatic recovery) | ||
| Control Output | NPN | Open-type collector, 24 V, maximum 100 mA (limited to main components only) | |
| PNP | Open collector 24 V, max. 100 mA (master only) | ||
| environmental resistance | levels of protection | IP67 | |
| ambient temperature | -20°C to +55°C, no freezing | ||
| ambient humidity | 35–85% RH, no condensation | ||
| ambient humidity | Incandescent: max. 20,000 lux; sunlight: max. 30,000 lux | ||
| antiknock characteristics | Acceleration 500 m/s², 5 times in each direction X/Y/Z | ||
| vibration resistance | 10–55 Hz, 1.5 mm amplitude, 2 h each along X/Y/Z | ||
| Shell Material | Housing: PBT plastic; control panel: PC (polycarbonate); control buttons: silicone; lens: PC (polycarbonate) | ||
| outline dimension | 63mm(H)*43mm(W)*24.5mm(D) | ||
| Product Weight | 104g | ||
| accessories of a product | not have | ||
Note: Specified measurement conditions: ambient temperature +23 °C.
Product Dimensions
Input and output circuit diagram
