Product Features
·Built-in RGB three-color light source with color mode and color mark mode
·Adjustable detection hysteresis to eliminate the impact of vibration of the measured object
·Unique dual-mode design supports simultaneous color and light intensity detection; no false outputs at critical edge positions without background or targets for stable detection
·Two-point setting mode
·Adjustable detection hysteresis to eliminate the impact of vibration of the measured object
·Unique dual-mode design supports simultaneous color and light intensity detection; no false outputs at critical edge positions without background or targets for stable detection
·Two-point setting mode
Product Parameters
| type | Conductor Extension Type | ||
| type | NPN | HS-S11N | |
| PNP | HS-S11P | ||
| Detection Distance | 18mm~28mm | ||
| Power Consumption | Power consumption below 850 MW (at a supply voltage of 24 V and a current consumption of up to 35 mA) | ||
| reaction time | Below 200 μs | ||
| Light projection element | Composite LED: Red/Green/Blue\n(Light emission peak wavelengths: 640 nm/525 nm/470 nm) | ||
| Mode Switch | Color Scale Mode | Color code detected: 0N | |
| Color Mode | ON when consistent | ||
| supply voltage | DC 12V~24V(±10%） | ||
| Output Maximum Current | 50mA | ||
| output form | NPN open-circuit collector transistor\nMaximum input current: 100 mA;\nApply an additional voltage below 30 V DC (between the output and 0 V);\nResidual voltage below 1.5 V (at an input current of 50 mA) | PNP open-circuit collector transistor\nMaximum outflow current: 100 mA;\nApply an additional voltage below 30 V DC (between the output and +V);\nResidual voltage below 1.5 V (at an output current of 50 mA) | |
| Max. sink current 100 mA; | Max. source current 100 mA; | ||
| Applied voltage ≤30 VDC (between output and 0 V) | Applied voltage ≤30 VDC (between output and +V) | ||
| Residual voltage ≤1.5 V (at 50 mA sink) | Residual voltage ≤1.5 V (at 50 mA source) | ||
| output function | Color Scale Mode | Color code detected: ON | |
| Color Mode | ON when consistent | ||
| short-circuit protection | equipped with (automatic recovery) | ||
| environmental resistance | levels of protection | IP67 | |
| Ambient temperature / humidity | -20°C to +55°C, no freezing | ||
| 35–85% RH, no condensation | |||
| antiknock characteristics | Acceleration 500 m/s², 5 times in each direction X/Y/Z | ||
| vibration resistance | 10–55 Hz, 1.5 mm amplitude, 2 h each along X/Y/Z | ||
| Shell Material | Housing: PBT plastic; control panel: PC (polycarbonate); control buttons: silicone; lens: PC (polycarbonate) | ||
| outline dimension | 63mm(H)*43mm(W)*24.5mm(D) | ||
| Product Weight | 104g | ||
| accessories of a product | not have | ||
Note: Specified measurement conditions: ambient temperature +23 °C.
Product Dimensions
Input and output circuit diagram
