Product Features
· The measurement process is unaffected by object color, transparency, gloss and ambient light.
· Response time ≤50ms, detection blind zone: 0mm~40mm, maximum detection distance up to 500mm.
· Supports analog voltage output and analog current output.
· Equipped with temperature compensation function, free from the influence of ambient temperature.
· Strong anti-interference capability against enhanced electromagnetic interference and radio frequency interference.
· Detection distance and function modes can be arbitrarily set via remote calibration.
Product Parameters
type NPN PNP 4~10mA 0~10V
model HUN18-05N-C3 HUN18-05P-C3 HUN18-05I-C3 HUN18-05U-C3
Detection Range 40mm~500mm
Detection Distance 500mm
Minimum Detection Window 10mm
response time ≤50ms
Detection Blind Spot 0mm~40mm
Beam Angle ± 7°
Wave Direction Axial wave emission
service frequency 200kHz
repeatability precision Set distance to ±0.5%
Analog Linearity — Full scale: ±0.1%
Hysteresis Range Set to 1% of the distance
temperature drift ±2% of full range (with built-in temperature compensation function)
Standard Test Object 100mm*100mm
Adjustment Method Set the detection window via the remote teaching line, and define the sequence to determine forward/reverse output.
LED pilot lamp Green light Steady: power on / Off: not powered
Blue light Steady: teachable (first 5 min after power-on) / Flashing: in teaching mode
Yellow light Steady: switch closed / Flashing: target detected in teaching mode
Red light Steady: switch open / Flashing: no target detected or error
Synchronization Function For simultaneous use: multiple ultrasonic units connected via sync cable (custom spec)
supply voltage DC 24V（±10%）
no-load current 30mA
Power-on delay ＜500ms
Control Output Switching Output The maximum output current of NPN or PNP transistors is 100 mA; voltage drop in conduction mode: <1 V at 10 mA, <1.5 V at 100 mA
Electrical Connection connector Suffix-C3 Specification: M12 four-core male threaded connector
environmental resistance levels of protection IP65
ambient temperature -20°C to +60°C, no freezing
ambient humidity 35–85% RH, no condensation
antiknock characteristics Acceleration 500 m/s², 5 times in each direction X/Y/Z
vibration resistance 10–55 Hz, 1.5 mm amplitude, 2 h each along X/Y/Z
Shell Material Nickel-plated copper; PBT (polyethylene terephthalate)
outline dimension 51mm(H)*M18mm(D)
Product Weight 22g
accessories of a product To purchase cables, select a model separately
Product Dimensions
Product Dimensions
Input and Output Circuit Diagram
Input and Output Circuit Diagram