Product Features
· Compact and compact design for easy installation
· Integrated communication core with high speed and stability
· Slaves support Modbus RTU protocol and 8-channel programmable input/output I/O
· Masters support ModbusTCP, Profinet, EtherCAT,
· Ethernet/IP protocols
Product Parameters
Number of IO-Link channels 2*Class-A + 4*Class-B
model CM008MP-2A4B CM008MEC-2A4B CM008MEP-2A4B CM008MCC-2A4B
Number of IO-Link channels 8*Class-A + 0*Class-B
model CM008MP-8A0B CM008MEC-8A0B CM008MEP-8A0B CM008MCC-8A0B
Bus Transmission protocol Profinet EtherCAT EtherNet/IP CC-Link IE Field Basic
work pattern Automatic negotiation mechanism, automatic flipping function
propagation velocity 10/100 Mbps
address assignment Distribution Method: Programming Software / Code Switch / Master Station Allocation / Web Page Configuration
Topological Extension Function support
Ring Network Redundancy Function support
Power Supply working voltage DC 24V
Consumption Current ＜200mA
mains power supply Current: No more than 8 A
Auxiliary Power Supply UA: No more than 8A
Electrical Isolation US and UA: 24V isolated, 0V connected
interface type Power Supply M12 L-CODE five-pin male connector *1, M12 L-CODE five-pin female connector *1
Bus Communication M12 D-CODE four-core female connector *2
Extension Interface 2A4B
Signal Connection 2A4B
Signal Connection 8A0B
Electrical Parameters Interface Signal Type DI/DO/IO-Link (configured via software) allows individual interfaces to be defined separately
IO-Link Channel Count 2A4B Route 6 (X01-X06)
IO-Link Channel Count 8A0B
IO-Link Interface Type 2A4B 2*Class-A + 4*Class-B
IO-Link Interface Type 8A0B
IO-Link Version IO-Link V1.1
transmission speed COM1(4.8kbps)、COM2(38.4kbps)、COM3(230.4kbps)
DI import\nnumber of channels 2A4B Up to 8 channels (4 Class-A channels + 4 Class-B channels)
DI import\nnumber of channels 8A0B
Enter power supply current (Pin 1 & Pin 3) The IO-Link interface supports a maximum current of 1.6 A, while the standard signal interface supports up to 200 mA.
Auxiliary power supply current (Pin 2 & Pin 5) Maximum current per channel: 2 A
Input Signal Type PNP mould
Input Delay ≤1.6ms
Number of DO Output Channels 2A4B Up to 6 channels (1 channel per signal interface)
Number of DO Output Channels 8A0B
Output Power Current Maximum current per channel: 2 A
Output Signal Type PNP/NPN (configurable)
Output Switching Frequency Resistive load: 100 Hz; Inductive load: 5 Hz
diagnose Communication Status LED Indication, Communication Message
Power Supply Monitoring Low Voltage Alarm
Short Circuit/Overload Protection LED indicate
Extended Connection LED indicate
environmental resistance levels of protection IP67
ambient temperature Temperatures range from-25°C to +70°C, without freezing.
ambient humidity 35–85% RH, no condensation
antiknock characteristics Acceleration: 500 m/s², applied five times in each direction (X, Y, Z).
vibration resistance 10–55 Hz, composite amplitude of 1.5 mm; measured over 2 hours along the X, Y, and Z axes respectively
Shell Material ABS+PC (polycarbonate)
outline dimension 225mm(H)*60mm(W)*37mm(D)
Product Weight 576g
accessories of a product not have
Product Dimensions
Product Dimensions
Wiring Diagram
Wiring Diagram