Product Features
·Opto-isolation for input/output signals
·Hardware filtering with 500μs
·M8 connector interface
·Overvoltage and short-circuit protection functions
·Bus and channel isolation technology for safety and reliability
·Hardware filtering with 500μs
·M8 connector interface
·Overvoltage and short-circuit protection functions
·Bus and channel isolation technology for safety and reliability
Product Parameters
| type | 8DI，PNP，8*M8 | 8DI，NPN，8*M8 | 8D0，PNP，8*M8 | 8DO，NPN，8*M8 | 4DI+4DO，PNP，8*M8 | 4DI+4DO，NPN，8*M8 | |
| model | CM007SEL-8IP-M8 | CM007SEL-8IN-M8 | CM007SEL-8OP-M8 | CM007SEL-8ON-M8 | CM007SEL-4I4OP-M8 | CM007SEL-4I4ON-M8 | |
| interface type | Extended Connection (IN) | M12 B-CODE five-core male thread interface *1 | |||||
| Extended Connection (OUT) | M12 B-CODE five-core female connector *1 | ||||||
| Power Connection | The expansion interface includes power supply | ||||||
| Signal Connection | M8 A-CODE three-core female connector *8 | ||||||
| Electrical Parameters | service voltage | DC 24V | |||||
| Consumption Current | ≤50mA | ||||||
| Input Channels | Route 8 | - | Route 4 (X01-X04) | ||||
| Enter the power supply current | Maximum current per channel: 200 mA | - | Maximum current per channel: 200 mA | ||||
| Input Signal Type | Sensor/Switch | - | Sensor/Switch | ||||
| Input Delay | ≤2ms | - | ≤2ms | ||||
| Output Channels | - | Route 8 | Route 4 (X05-X08) | ||||
| Output Power Current | - | Maximum current per channel: 500 mA; total current not exceeding 4 A | |||||
| Output Signal Type | - | Actuator/Indicator Light | Actuator / Indicator | ||||
| Output Switching Frequency | - | Resistive load: 100 Hz; Inductive load: 5 Hz | |||||
| diagnose | Communication Status | LED Indication, Communication Message | |||||
| Power Supply Monitoring | Low Voltage Alarm | ||||||
| Short Circuit/Overload Protection | LED indicate | ||||||
| environmental resistance | levels of protection | IP67 | |||||
| ambient temperature | Temperatures range from-25°C to +70°C, without freezing. | ||||||
| ambient humidity | At 40–85% RH, no condensation occurs | ||||||
| antiknock characteristics | Acceleration: 500 m/s², applied five times in each direction (X, Y, Z). | ||||||
| vibration resistance | 10–55 Hz, composite amplitude 1.5 mm; measured over 2 hours along the X, Y, and Z axes respectively | ||||||
| Shell Material | ABS+PC (polycarbonate) | ||||||
| outline dimension | 160mm(H)*30mm(W)*37mm(D) | ||||||
| Product Weight | 139g | ||||||
| accessories of a product | not have | ||||||
Product Dimensions
Wiring Diagram
