Product Features
· Input/output opto-isolation
· Configurable as input or output
· Overvoltage and short-circuit protection functions
· Designed in accordance with IO-Link v1.1 specification, supporting COM3 communication speed
· Supports IO-Link secondary expansion
· Configurable as input or output
· Overvoltage and short-circuit protection functions
· Designed in accordance with IO-Link v1.1 specification, supporting COM3 communication speed
· Supports IO-Link secondary expansion
Product Parameters
| type | 4 AI，8*M12 | 8 AI，8*M12 | |
| model | CM008SEL-4IA | CM008SEL-4IV | |
| interface type | Extended Connection (IN) | M12 A-CODE four-core male connector *1 | |
| Extended Connection (OUT) | M12 B-CODE five-core female connector *1 | ||
| Power Connection | Powered by the IO Link port at 24 V, 1.6 A | ||
| Signal Connection | M12 A-CODE five-core female connector *8 | ||
| Electrical Parameters | service voltage | DC 24V | |
| Consumption Current | ≤50mA | ||
| Input Channels | Route 4 (X01-X04) | Route 8 (X01-X08) | |
| Input Signal Type | 0~20mA | ||
| input impedence | For current input: 250 Ω; for voltage input: 1 MΩ | Up to 16 channels, NPN output | |
| resolution ratio | 16 bit | ||
| change-over time | Less than 300 μs | ||
| certainty of measurement | ±0.3% | ||
| Extension Distance | You can expand by up to 3 additional Link Bus slaves (up to 1 Link Bus analog/temperature slave), with a total connection length of 60 meters. | ||
| IO-Link Parameters | interface type | CLASS A | |
| edition | IO-Link V1.1 | ||
| transmission speed | COM2 (38.4 kbps) or COM3 (230.4 kbps) | ||
| Process Data Byte | 11 input bytes, 3 output bytes | ||
| diagnose | Communication Status | LED Indication, Communication Message | |
| Power Supply Monitoring | Low Voltage Alarm | ||
| Short Circuit/Overload Protection | LED indicate | ||
| environmental resistance | levels of protection | IP67 | |
| ambient temperature | Temperatures range from-20°C to +60°C, without freezing. | ||
| ambient humidity | At 40 to 85% RH, no condensation occurs | ||
| antiknock characteristics | Acceleration: 500 m/s², applied five times in each direction (X, Y, Z). | ||
| vibration resistance | 10–55 Hz, composite amplitude 1.5 mm; 2 hours each for the X, Y, and Z axes | ||
| Shell Material | ABS+PC (polycarbonate) | ||
| outline dimension | 160mm(H)*60mm(W)*37mm(D) | ||
| Product Weight | 278g | ||
| accessories of a product | not have | ||
Product Dimensions
Wiring Diagram
